Parameters
Item | Faucet handles automatic polishing machine |
Model | YT-B109 |
Power | 380V 50HZ |
The rotation speed of polishing whee | Adjusted by frequency |
Dimension | 2200*1900*2100 mm |
Effect | Bright, mirror |
Effectiveness | It takes several seconds to finish the the product of polishing . The process of polishing is like the process of flowingwater and need 1 worker to polish. |
| Suitable | Kinds of faucet , faucet handle , bathroom part , metal part sanitary and so on |
Advantage
1. Automatic polishing force compensation system , ensure stable polishing quality .
2. Automatic spray wax
3. Automatic cloth wear compensation
4. Automatic fault alarm
5. The entire moving platform move to the bottom of the cloth wheel by the bottom cylinder , and the cloth wheel is pressed down to the workpiece . Then it start to polish
6. There is a swing cylinder under the moving table to swing it so as to eliminate the grain during the polishing process .
7. Total working process was controlled by the PLC
8. The worker only install the workpiece , press the button and pick up it after polishing .
9. This equipment is an upgraded model of YT-B105 .The efficiency is 2 times of YT--B105.
Suitable
Kinds of faucet , faucet handle , bathroom part , metal part sanitary and so on
Faucet handle automatic polishing machine
The main function of faucet handle automatic polishing machine is to deal with the oxide of faucet handle surface. The effect of the handle become bright or mirror . This polishing machine will reduce labor cost which can automatic operate or manual.
Suitable
Kinds of faucet handle ,faucet flat , hardware part.
Parameters
Item | faucet handle automatic polishing machine |
Model | YT-C703-6 |
Power | 380V 50HZ |
Dimension | 2200*1900*2100 mm |
The rotation speed of polishing wheel | Adjusted by frequency |
Effect | Bright, mirror, brush |
Effectiveness | It takes 5-6s to finish the the product of polishing . The process of polishing is like the process of flowingwater and need 1 worker to polish . |
Company advantage
1. Yatai company was established in 2005, we specialized in making kinds of polishing machine.
2. Fitters have 5 years working experience, They can install the equipment individually depend on the draw.
3. There are more than 20 backbones who have followed the factory.
Parameters
Item | Faucet handles automatic polishing machine |
Model | YT-B109 |
Power | 380V 50HZ |
The rotation speed of polishing whee | Adjusted by frequency |
Dimension | 2200*1900*2100 mm |
Effect | Bright, mirror |
Effectiveness | It takes several seconds to finish the the product of polishing . The process of polishing is like the process of flowingwater and need 1 worker to polish. |
| Suitable | Kinds of faucet , faucet handle , bathroom part , metal part sanitary and so on |
Advantage
1. Automatic polishing force compensation system , ensure stable polishing quality .
2. Automatic spray wax
3. Automatic cloth wear compensation
4. Automatic fault alarm
5. The entire moving platform move to the bottom of the cloth wheel by the bottom cylinder , and the cloth wheel is pressed down to the workpiece . Then it start to polish
6. There is a swing cylinder under the moving table to swing it so as to eliminate the grain during the polishing process .
7. Total working process was controlled by the PLC
8. The worker only install the workpiece , press the button and pick up it after polishing .
9. This equipment is an upgraded model of YT-B105 .The efficiency is 2 times of YT--B105.
Suitable
Kinds of faucet , faucet handle , bathroom part , metal part sanitary and so on
Faucet handle automatic polishing machine
The main function of faucet handle automatic polishing machine is to deal with the oxide of faucet handle surface. The effect of the handle become bright or mirror . This polishing machine will reduce labor cost which can automatic operate or manual.
Suitable
Kinds of faucet handle ,faucet flat , hardware part.
Parameters
Item | faucet handle automatic polishing machine |
Model | YT-C703-6 |
Power | 380V 50HZ |
Dimension | 2200*1900*2100 mm |
The rotation speed of polishing wheel | Adjusted by frequency |
Effect | Bright, mirror, brush |
Effectiveness | It takes 5-6s to finish the the product of polishing . The process of polishing is like the process of flowingwater and need 1 worker to polish . |
Company advantage
1. Yatai company was established in 2005, we specialized in making kinds of polishing machine.
2. Fitters have 5 years working experience, They can install the equipment individually depend on the draw.
3. There are more than 20 backbones who have followed the factory.
